|
|
Rubber Additives T.P 316 |
Rubber Additives TP 316 used as dispersing agent in order to obtain better dispersion of fillers, especially carbon blacks.
Rubber Additives TP 316 improve teh rubber compound flow of all kinds of rubber compound which are calendered, etruded or used for transfer and mouldings.
Rubber Additives TP 316 Improves the surface finish of vulcanisates.
Rubber Additives TP 316 compatible NR.SBR, EPDM, CR, NBR, IIR, CSM, BR, EVA, ECO,CM.
Rubber Additives TP 316 does not influence the peroxide curing negatively.
|
|
|
|
|
Rubber Additives S 80 |
Rubber Additives S 80 is coated soluble sulphur containing dispersing agents, wetting agents and EPDM rubber. Incorporation and dispersion of the sulphur are taking place without formation of agglomerates and local concentrations.
Rubber Additives S 80 can be added to any natural rubber and synthetic rubber compound which is sulphur cured.
|
|
|
|
|
Rubber Additives T.P 133 |
Rubber Additives TP 133 is used for the treatment of vulcanized rubber compounds in the form of sheet or strip to prevent surface sticking.
Rubber Additives TP 133 is paste type agent. It is non foaming
|
|
|
|
|
Rubber Additives T.P 130 |
Rubber Additives TP 130 is used for the treatment of vulcanized rubber compounds in the form of sheet or strip to prevent surface sticking.
Rubber Additives TP 130 is powder type agent. It is not dusting and non foaming
|
|
|
|
|
Rubber Additives Z.N |
Rubber Additives Zn :
1-can replace stearic acid
2-Reduces stess relaxation
3-Improve building tack
4-Improve dynamic properties
5-Reduces comprssion set at low temperature.
|
|
|
|
|
Rubber Additives T.P 342 |
Rubber Additives TP 342 is highly effective process additive and mould release agent.
Rubber Additives TP 342 is a internal lubricant and filler dispersant.
Rubber Additives TP 342 compatible NR,SBR, EPDM, CR, NBR, IIR, CSM, BR, EVA, ECO,CM.
Rubber Additives TP 342 suitable for pressureless vulcanisation process e.g.
UHF, LCM, Hot Air and Fluid Bed.
Rubber Additives TP 342 does not influence the peroxide curing negatively.
|
|
|
|
|
Rubber Additives T.P 344 |
Rubber Additives TP 344 is multi purpose processing additive for a wide range of polymers.
Rubber Additives TP 344 is a internal lubricant and filler dispersant for carbon black and silica.
Rubber Additives TP 344 improvement of mould flow, extrusion flow and surface finish.
Rubber Additives TP 344 compatible NR,SBR, EPDM, BR, NBR.
Rubber Additives TP 344 suitable for pressureless vulcanisation process e.g.
UHF, LCM, Hot Air and Fluid Bed.
Rubber Additives TP 344 does not influence the peroxide curing negatively.
|
|
|
|
|
Rubber Additives T.P 350 |
- Reduces compound viscosity with internal lubrication.
- Improve overall flow and processability of most polymers.
- Physical peptiser for NR.
- Not suitable for halogen-containing elastomers
- Can partially replace stearic acid
|
|
|
|
|
Predisperse Sulphur |
Soluble Sulphur containing Wetting agents, dispersing agents, EPDM Rubber. Can be added
to natural Rubber and Synthetic Rubber which are sulphur cured .
|
|
|
|
|
Anti Tack |
Treatment of unvulcanised rubber compounds in the form of sheet or strip to prevent surface sticking.
|
|
|
|
|
Activate Zinc |
Used as Activator in Natural Rubber, Can replace stearic acid, Reduces stress relaxation, Improve building tack . Improve dynamic properties. Reduces compression set at low temperature.
|
|
|
|
|
|
|
|
|